RunCam Device Protocol
RunCam Device Protocol may be the serial interaction protocol initially developed when it comes to RunCam separate and analog digital digital cameras.
The protocol itself supports not merely complete camera osd menu silverdaddies tubes navigation but additionally triggering recording on separate style digital digital cameras in addition to interacting the available sd-card room, syncing the present date, composing towards the osd and switching the digital digital camera or wifi function (if available) on / off.
Not totally all popular features of the protocol are supported in betaflight but both betaflights help while the protocol itself have been in continued development.
Recently comparable to TBS Smartaudio and IRC Tramp other businesses (for example Caddx) started initially to follow help for the protocol inside their digital digital digital cameras.
Presently supported features in betaflight
The protocol that is current can be seen here:
Supported cameras/devices and functions
Analog/classic fpv cameras
Any RunCam Camera that supports UART digital digital camera settings should work.
Micro Swift 3, Runcam Racer 2, etc.
RunCam Split cameras (1,2,mini and mini 2 etc.) also work nonetheless might need a firmware enhance. The runcam that is first delivered with yet another protocol – remember to update it in any event as more recent firmwares enhanced different things.
OSD Menu Control
Going into the menu that is osd alter settings should make use of similar stick commands as FPV Camera Control
Camera Button Simulation (Record/Photo/Wifi/Power Key)
Firmware: BetaFlight Firmware (≥3.2.0) Configurator computer software: Betaflight Configurator (≥3.2.0)
Any UART that is available interface the BetaFlight
1.Connect the RunCam separate because of the UART screen of this trip Controller
2.Make the trip Controller recognize the Split
As an example, we connect the separate into the UART 3 program from the BetaFlight: link the journey controller to your computer, then start the Betaflight Configurator. When you look at the Peripherals line for the line UART3 (from the Ports tab), select RunCam unit and then click Save And Reboot.
3.Instructions associated with functions regarding the digital digital camera and transmitter that is assigning for them
Into the Betaflight Configurator, navigate towards the Modes tab. You will find brand new CAMERA WI-FI, CAMERA POWER and CAMERA CHANGE modes.
CAMERA WI-FI: turn on/off the WIFI of this digital digital camera. Whenever when you look at the OSD of this digital digital camera, this is certainly utilized to verify your selection. CAMERA ENERGY: start/stop the movie. Whenever into the OSD of this camera, this is certainly utilized to maneuver towards the menu item that is next. CAMERA CHANGE MODE: switch among the list of three modes, movie, picture and OSD establishing mode. Whenever when you look at the OSD associated with digital digital camera, this can leave the menu. Assign any channel that is available the big event you’ll need, as an example:
Assign the AUX1 into the CAMERA WI-FI, range 1900-2100 Assign the AUX2 towards the CAMERA ENERGY, range 1900-2100 Assign the AUX3 towards the CAMERA CHANGE MODE, range 1900-2100
4.Assign the channel to your switch for the controller
Please select your Model in the controller, then use of the Mixer program and designate the channel to your switch associated with the controller. Take opentx 2.2.0 as an example, assign the channels CH5, CH6, and CH7 to SA, SB, SD respectively.
Energy the trip Controller while the RunCam separate
Set the SA into the base, the digital digital camera turns on/off the WIFI Set the SB to your base, the digital camera starts/stops the video clip Set the SD into the base, the digital digital camera switches on the list of three modes: video clip, picture and OSD environment mode
Caddx Turtle v2
Caddx additionally applied help for the RunCam Device protocol via their final firmware improvement. Take note nevertheless that just the turtle v2 correctly supports UART settings since the v1 had some connections that are incompatible the board despite having UART pads.
For the v1 it is possible to nevertheless utilize FPV Camera Control to enter the OSD and get a grip on the digital digital camera via your transmitter.
Beware that OSD control is disabled during recording.
OSD Menu Control
Going into the menu that is osd alter settings should make use of the exact same stick commands as FPV Camera Control
Camera Button Simulation (Recording)
Just like the RunCam Split starting/stopping recording on a switch is supported. Proceed with the directions outlined above to create it.
Other supported devices
RunCam Control Adapter (OSD Cable Simulation)
The RunCam Control Adapter, which links amongst the OSD pin plus an UART regarding the FC, enables navigation associated with the OSD menu through the transmitter. Unlike the FPV Camera Control nonetheless no resistors that are additional capacitors are needed.
With regards to the device some keys that are shortcut additionally supported. As an example roll that is keeping to to your right will switch the presently chosen scene when utilizing a Micro Swift2.
